Portwell ROBO-8113VG2AR, User Manual

Page: 11 / 98

ROBO-8113VG2AR
Copyright © Portwell 2016 ROBO-8113VG2AR User's Guide 11
2 Specifications
Main Processor
◆
Intel® Kaby Lake-S/Skylake -S E3-12xxv5/v6 and Core™ i Processors
System BIOS
◆
AMI UEFI BIOS
Main Memory
◆
Up to 32 GB ECC or non-ECC DDR4 on two Long-DIMM sockets. Supports dual channel DDR4
1866/2133 MHz SDRAM
Graphics
◆
Controller: Intel® Gfx Gen 9, HD graphics
◆
VGA: Resolution up to 1920 x 1200 @ 60Hz
◆
DVI-D: Resolution up to 1920 x 1200 @ 60Hz
(VGA+DVI-D on bracket by DVI-I port)
◆
HDMI: Resolution up to 4096 x 2160 @ 24Hz
Expansion Interface
◆
From CPU: 1x PCI Express x16 or 2x PCI Express x8 or 1x PCI Express x8 + 2x PCI Express x4 by
jumper setting (Gen3 up to 8.0 GT/s)
◆
From PCH: 1x PCI Express x4 or 4x PCI Express x1 by different bios support (Gen 3 up to 8.0 GT/s)
SATA Interface
◆
Six SATA III ports (SATA 6Gb/s), dual ports via backplane
Input/Output
◆
Serial Ports: 2x RS-232 & 2x RS-232/422/485 selectable by bios
◆
USB Port: 2x USB 3.0 on bracket, 8x USB 3.0 on board header, 4x USB 2.0 ports through backplane
◆
GPIO connector: 8GPI + 8GPO
◆
Audio Interface: Mic-In / Line-Out / Line-in (on-board header)
Ethernet
◆
Supports dual 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 interface by Intel WGI219LM and
WGI210AT controller
◆
Dual RJ45 connector on bracket
TPM
◆
On-board TPM 2.0 support (TPM IC: Infineon SLB9665TT2.0)
High Drive GPIO
◆
One pin-header for GPIO (8bit in &8bit out)