Portwell ROBO-8113VG2AR, User Manual

Page: 91 / 98

ROBO-8113VG2AR
Copyright © Portwell 2016 ROBO-8113VG2AR User's Guide 91
7.2 BIOS Setting
It is assumed that users have correctly adopted modules and connected all the devices cables required before turning on ATX power. CPU,
CPU Fan, 288-Pin DDR4 memory, keyboard, mouse, SATA hard disk, DVI-I connector, device power cables, ATX accessories are good
examples that deserve attention. With no assurance of properly and correctly accommodating these modules and devices, it is very possible
to encounter system failures that result in malfunction of any device.
To make sure that you have a successful start with ROBO-8113VG2AR, it is recommended, when going with the boot-up sequence, to hit
“delete” or ”Esc” key and enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.
Loading the default optimal setting
When prompted with the main setup menu, please scroll down to “Restore Defaults”, press “Enter” and select “Yes” to load default optimal BIOS setup. This
will force your BIOS setting back to the initial factory configurations. It is recommended to do this so you can be sure the system is running with the BIOS setting
that Portwell has highly endorsed. As a matter of fact, users can load the default BIOS setting at any time when system appears to be unstable in boot up
sequence.