Portwell ROBO-8113VG2AR, User Manual

Page: 19 / 98

ROBO-8113VG2AR
Copyright © Portwell 2016 ROBO-8113VG2AR User's Guide 19
3.2 Jumpers Settings
For users to customize ROBO-8113VG2AR’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not
Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Jumper Table
The jumper settings are schematically depicted in this manual as follows:
Jump Function List:
Jumper Function Remark
JP1 Configure PCIEx16, x8 (For C236/Q170 only) Header2Px2/2.54mm
JP2 Auto Power Button(Reserve) PH2Px1/2.54mm
JP3 LPC 80 Port Pin Header Header5Px2/2mm
JP4 Clear CMOS Setup PH3Px1/2.54mm
JP5 WDT Enable/Disable Pin PH2Px1/2.54mm
JP6 ATX/AT Select Pin PH3Px1/2.54mm