ROBO-8113VG2AR
Copyright © Portwell 2016 ROBO-8113VG2AR User's Guide
90
Serial ATA
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a time; there are total six connectors, SATA0~5 port. The installation of
Serial ATA is simpler and easier than IDE, because SATA hard disk doesn’t require setting up Master and Slave, which can reduce mistake of hardware
installation. All you need to operate AHCI, RAID (0/1/5/10) application for system, please follow up setting guide in BIOS setup utility.
ROBO-8113VG2AR can support six SATA interface (SATAIII, 6.0Gb/s) on board. It has four J2/J7/J15/J16 SATA ports on board; two SATA ports on
PICMG Backplane. The SATA interface shall support both 1.5/3.0Gb & 6.0Gb operation per the SATA specification.
Summary of Contents for ROBO-8113VG2AR
Page 14: ...ROBO 8113VG2AR Copyright Portwell 2016 ROBO 8113VG2AR User s Guide 14...
Page 17: ...ROBO 8113VG2AR Copyright Portwell 2016 ROBO 8113VG2AR User s Guide 17 Block Diagram...
Page 36: ...ROBO 8113VG2AR Copyright Portwell 2016 ROBO 8113VG2AR User s Guide 36...
Page 87: ...ROBO 8113VG2AR Copyright Portwell 2016 ROBO 8113VG2AR User s Guide 87 6 2 5 Save Exit...