Preface
How to Use This Manual
The manual describes how to configure your PEB-2530VL system to meet various
operating requirements. It is divided into four chapters, with each chapter
addressing a basic concept and operation of Embedded Board Computer.
Chapter 1: Introduction.
This chapter presents what you have in the inside of box
and give you an overview of the product specifications and basic system architecture
for this model of single board computer.
Chapter 2: Hardware Configuration Setting.
This chapter shows the definitions and
locations of Jumpers and Connectors that you can easily configure your system.
Chapter 3: System Installation.
This chapter describes how to properly mount the
CPU and main memory, Solid State Flash disk, or optional flat panel display
interface module to get a safe installation and give you a programming guide of
Watch Dog Timer function. Besides, it will introduce and show you the driver
installation procedure about Graphics Controller.
Chapter 4: BIOS Setup Information.
This chapter specifies the meaning of each
setup parameters and how to get advanced BIOS performance and update new BIOS.
In addition, POST checkpoint list will give you a guide of trouble-shooting.
The content of this manual and EC declaration document is subject to change
without prior notice. These changes will be incorporated in new editions of the
document.
Portwell
may make supplement or change in the products described in
this document at any time.
Updates to this manual, technical clarification, and answers to frequently asked
questions will be shown on the following web site: http://www.portwell.com
