BIOS Setup Information
PEB-2530VL User’s Manual
4-8
If you select Type “User”, you will need to know the information listed below. Enter
the information directly from the keyboard and press <Enter>. This information
should be included in the documentation from your hard disk vendor or the system
manufacturer.
If the controller of HDD interface is ESDI, the selection shall be “Auto”.
If you select Type “Auto”, BIOS will Auto-Detect the HDD & CD-ROM Drive at the
POST stage and showing the IDE for HDD & CD-ROM Drive.
TYPE drive
type
SIZE drive
size
CYLS
number of cylinders
HEADS
number of heads
PRECOMP write
precomp
LANDZONE landing
zone
SECTORS
number of sectors
MODE
mode type (ATUO,CHS,LBA,LARGE)
If a hard disk has not been installed select NONE and press <Enter>.
Drive A Type / Drive B Type
The category identifies the types of floppy disk drive A or drive B that have been
installed in the computer.
None
No floppy drive installed
360K, 5.25 in
5-1/4 inch PC-type standard drive; 360 kilobyte capacity
1.2M, 5.25 in
5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity
720K, 3.5 in
3-1/2 inch double-sided drive; 720 kilobyte capacity
1.44M, 3.5 in
3-1/2 inch double-sided drive; 1.44 megabyte capacity
2.88M, 3.5 in
3-1/2 inch double-sided drive; 2.88 megabyte capacity
Video
The category selects the type of video adapter used for the primary system monitor.
Although secondary monitors are supported, you do not have to select the type in
Setup.
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array. For EGA,
VGA, SEGA, SVGA or PGA monitor adapters.
CGA 40
Color Graphics Adapter, power up in 40 column mode
CGA 80
Color Graphics Adapter, power up in 80 column mode
MONO Monochrome
adapter,
includes high resolution monochrome
adapters
