Porter & Charles IR60S, Manual, Page: 9 / 39

10
F - Electronic Programmer Operation
oven program m er oven therm ostat selector oven function selector
A UTO
09:05
Caution
The electronic clock features Touch-Control technology.
To operate, simply touch the glass control symbols with your fingertip.
The touch control sensitivity continuously adapts to ambient conditions. Make sure the glass
surface of the control panel is clean and free of obstacles when plugging in the oven.
If the clock does not respond correctly when you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this causes the sensors to adjust automatically so they
will react to fingertip control.
Electronic Clock Settings
Symbol
:
lights up when the clock timer is selected.
Symbol AUTO: lights up to indicate that the oven is programmed.
Symbol
:
indicates that the oven is transmitting heat to the food.
+/- Sensors: enable you to select a time.
Sensors
:
enable you to program the electronic clock functions.
Setting the Time
When you turn on the oven, you will see the clock flashing "12:00".
Set the clock by touching the + or
– sensor. You will hear 2 beeps confirming that the time has
been set.
To change the time, press the + and
– sensors at the same time. The current time will then flash
on the screen. Change the time by pressing the + or
– sensors. Two beeps will then confirm that
the new time has been set.
NOTE
The clock light has a night mode so the display light will be dim between 00:00 and 6:00 o'clock.