Porter & Charles IR60S, Manual, Page: 30 / 39

31
Normally, the disturbance takes a few seconds. The Ecook includes a filter that will not show
the
“U” unless multiple power disruptions have occurred. The protection takes place, but the “U” is
not shown with just one short disturbance.
Errors / Alarms:
When an error is detected, the whole appliance or the burner/s are switched off, a beep
sounds (only if
one or more burners are active), and all displays show an
‘F’ letter and the error
code alternately.
While in error status, the keys of the corresponding burners are not operative.
Except EEPROM and microcontroller errors, all errors are recoverable. That is, when the cause
of the error disappears, all displays are deactivated and the cooktop returns to normal operation.
Fault/Error
(Visualization Priority Order)
Burner Displays
(fore 0.5 sec./ back
0.5 sec)
Effect in the
appliance
Normal status recovery
Microcontroller fault F0 App. off -------
On/Off key emitter fault FA App. off
When the fault
disappears
On/Off key receiver fault FC App. off
When the fault
disappears
User interface temperature sensor short-
circuit
FE App. off
When the fault
disappears
User interface temperature sensor open-
circuit
Ft App. off
When the fault
disappears
User interface over temperature Fc App. off
When user interface
temperature < T
EEPROM fault FH App. off -------
Microcontroller A/D converter multiplexer
fault
FJ App. off
When the fault
disappears
Ambient Light fault FL App. off
When satisfactory
ambient lighting is
detected
Microcontroller A/D converter conversion
fault
FU App. off
When the fault
disappears
Communication fault F5 Burner/s off
When the fault
disappears
Burner temperature sensor short-circuit F1 Burner/s off
When the fault
disappears