Porter & Charles IR60S, Manual, Page: 26 / 39

27
Stop & Go function:
The Stop and Go function allows temporary pausing of the cooking process, allowing the user to
answer the door or the telephone without worrying that the water will boil over. This function is
also useful to clean the surface of the cooktop without changing the selected cooking settings.
The stop function is activated when the STOP&GO key (n°11) is touched for more than 2
seconds: The key blinks, makes a sound, and the cooktop functions are temporarily stopped.
The actual power setting of the burners is saved, and all the active burners are set to level 0.

the burners' auto-switch off times are stopped,

all the timers' running count downs are stopped,

all keys are locked except the Stop & Go key (11) and the On/Off Key (4),

the Stop & Go LED is blinking and all burner displays show the stop sequence.
Stop sequence
: All the burner displays show a line growing sequentially until a "0" is formed.
When the "0" is complete, it begins to disappear a gain, segment by segment. When the last
segment is left, the cycle begins again. The segments are switched on/off anticlockwise.
To turn off the Stop & Go key, press it for more than 2 seconds. A beep will sound and the
previously selected settings will be restored.
If the cooktop is interrupted for more than 10 minutes, it turns off automatically.
When the timer is in the final minute, and displays the seconds, the Stop & Go function is
not activated.
Power Management:
Setting Cooktop's ECO Power Limit
The cooktop is pre-set to 7.200 Watts
The cooktop's maximum power limit is 7200W.
This power limit can be reduced by the user to 2800W, 3500W or 6000W.
Every time you disconnect the power, or any time after a power outage, the appliance is
reprogrammable.
To set a new Cooktop Power Limit:
•
During the first 30 seconds after plugging in the appliance press: (+) Timer Key, (-) Timer Key,
and ON/OFF key at the same time.
• The key lock has to be unlocked and all burners off