Porter & Charles IR60S, Manual, Page: 29 / 39

30
N - PROBLEMS AND SOLUTIONS
Displaying Special Statuses
The corresponding burner display alternates between two characters depending on the
status.
Special Status
(Visualization Priority
Order)
Start
conditions
End
conditions
Action
Burner
status
Burner
Display
fore
Burner
Display
back
Power increment not
allowed (only for ECO
models)
Asked Cooktop
power >
Cooktop ECO
power limit
2 sec
Power
increment
not allowed
On/Off 'r'
Burner without suitable
pan or without pan ²
No pan or not
suitable pan
over the burner
Suitable pan
over the burner
After 1
minute
burner off
On Power'
ʻuʼ²
Induction burner over
temperature
COIL
TEMPERATURE
> T1 ¹
COIL
TEMPERATURE
> T2 ¹
No power is
delivered to
the burner
Off
ʻ ʼ or
ʻHʼ
ʻC'
On Power'
Induction generator over
temperature
HEATSINK
TEMPERATURE
> T3
HEATSINK
TEMPERATURE
> T4
No power is
delivered to
the burner
Off
ʻ ʼ or
ʻHʼ
ʻC'
On Power'
Hot glass over a burner
(residual heat)
HEATSINK
TEMPERATURE
> T5
HEATSINK
TEMPERATURE
> T6
-------
Off
'H'
(1)
For T1, T2, T3, T4, T5 and T6 values see the corresponding drawing.
(2)
Some kinds of overvoltage disturbances in the main power supply can damage internal
electronics. The Ecook system includes an overvoltage protection circuit to protect itself. The
protection circuit disables the power circuit to cut the absorbed power of the induction. There are
2 protection circuits.
Depending on the disturbance, energy, and voltage level, both protection circuits can be
activated or only one related to the left side burners or one related to the right side burners.
The way to visualise this protection activation in the Touch control for a 4 burner is:
Protection Left two displays
Right two
displays
Left side activated "U"
Right side activated "U"
Both activated "U" "U"
This "U" message is the same as the "No Pan Detection" symbol.