36
Removing Oven Door
To remove the oven door
The oven door can be easily removed for better access while cleaning. To remove the oven door:
1.
Open the door fully and fit the supplied pin in the hole on both hinges.
2.
Raise the door slightly, holding the sides of the door about half way up.
Make sure
the pin stays in the hole the entire time.
Lift the door gently. This should
disconnect the hinges from the oven frame.
3.
Remove the door by continuing to raise it while pulling the door away from the oven.
When handling the door, be careful not to dislodge the pin from the hole. If the pin
does dislodge, the hinge will have to be closed by hand and the pin re-fitted onto the
hole before re-fitting into the oven.
To re-fit the oven door:
1. Holding the door at an angle to the oven, slide the hinges into the oven frame, making
sure that on each side the top curved arm fits into the top slot and the lower arm fits
into the bottom slot.
2. Make sure the hinges are pushed as far as they will go and the lower arm engages
into the plate mounted in the oven frame.
3.
Open the door fully and ensure the pin fully disengages from the hole. The door can
now be opened and closed as normal.
NOTE: Apply gentle downward pressure on the door to help remove the pins.
Changing the light bulb: (76/90cm. range)
The light bulb is located behind the glass cover and is a push-in type.
WARNING:
ENSURE THE APPLIANCE IS SWITCHED OFF BEFORE REPLACING THE LIGHT BULB TO
AVOID THE POSSIBILITY OF ELECTRIC SHOCK
To change a light bulb: (76/90cm. range)
1- Gently take out the glass cover.
2- Lift the bulb upwards out of holder.
3- Push in a replacement bulb.
4- Replace the glass cover making sure it fits correctly into place.
NOTE:
Recommended globe: Halogen 40W / 230V / 300
o
C.
Summary of Contents for IR60S
Page 38: ...39...