Porsche 9Y0.971.675.BE, Driver Manual, Page: 74 / 1111

72
Opening the web application
Additional configuration options and detailed infor-
mation on existing charging processes are available
using a Web Application designed specifically for
each charger.
Information
−
Depending on which browser you are using, the
Web Application may not open immediately. In-
stead, a notice regarding the browser's security
settings may be displayed first.
− You may have to enter the network key when
opening the Web Application. This depends on
your device's operating system.
Opening the web application via hotspot
The web application can be opened using a device
(PC, tablet or smartphone) via a hotspot set up by the
charger.
To set up a hotspot:
e Refer to chapter "Hotspot" on page 67.
e To open the Web Application when a hotspot
is active, enter the following IP address in the
address line of your browser: 192.168.0.1
Opening the web application via WiFi
The Web Application can be opened in the browser
on a device (PC, tablet or smartphone) that is logged
into the same home network as the charger.
– Enter the current IP address of the charger in
the browser’s address line. You will find the IP
address in
Settings e Network e Network
information .
– or –
Enter the host name of the charger in the brows-
er’s address line. You will find the host name in
the letter containing access data.
g For information on the web application, see the
manual at https://www.porsche.com/international/
aboutporsche/e-performance/help-and-contact/
Using the web application
Opening the web application
Establishing a connection to the charger
If the charger was integrated in your existing home
network (WiFi or Powerline Communication) during
setup, the Web Application can be accessed using
the assigned IP address.
For information on establishing network connections,
g
Refer to chapter "Connections" on page 73..
Opening the web application via WiFi
b Your device and the charger are located in the
same WiFi network.
1. Open your browser.
2. In the browser address bar: Enter the IP address
that was assigned during configuration (in Set-
tings
e
Networks
e
Network information on
the charger), or the host name of the charger (in
the letter containing your access data).
Opening the web application via Powerline Com-
munication
b
Your device and the charger are in the same
network via a PLC connection.
1. Open your browser.
2. In the browser address bar: Enter the IP address
that was assigned during configuration (in Set-
tings e Networks e Network information on
the charger).
Opening the web application via hotspot
Alternatively, a connection can be established via a
hotspot. The charger has a wireless access point
(hotspot), which is password-protected and requires
manual login. A WiFi-capable device can connect to