Porsche 9Y0.971.675.BE, Driver Manual, Page: 75 / 1111

73
the hotspot and then access the Web Application
of the charger. In the Web Application, you can inte-
grate the charger in the home network at any time.
b The charger is switched on. The charger auto-
matically enables its WiFi hotspot.
1. On your device, press the network or WiFi icon
on the taskbar or notification panel.
2. Select your WiFi network from the list. The name
of the WiFi network is the same as the SSID in
the letter containing access data, and is shown
as ICCPD-####### .
3. Press the Connect button.
4. In the Security code field, enter the security code
(shown as WiFi PSK in the letter containing your
access data).
🡆
The connection to the WiFi network is es-
tablished.
Note: In the Windows 10 operating system,
you are first asked to enter the router PIN.
Select the link Connect using a network se-
curity code instead, then enter the code.
5. Open your browser.
6. Enter the following IP address in the address bar
of your browser: 192.168.0.1 .
Information
If your device is in a home network, it can no lon-
ger access the Web Application via the hotspot IP
address (192.168.0.1), but only via the automatically
assigned IP address or the host name of the charger.
− Existing IP address entries:
− Web Application: Maintenance e Device in-
formation
− Charger: Settings e Networks e Net-
work information
− Existing host name entries:
−
Letter containing access data
−
Web Application: Maintenance
e
Device in-
formation
Redirecting to the web application
Information
Depending on which browser you are using, the Web
Application may not open immediately. Instead, a no-
tice regarding the browser's security settings may be
displayed first.
1. In the browser warning message that appears,
select Advanced .
2. In the next dialogue box, select Add exception .
🡆
The SSL certificate is confirmed and the
Web Application opens.
Charging history
Here, the charging processes of the charger are listed
chronologically. The following information is available
for every charging process:
–
Time
– Charging duration
– Consumption
–
Cost (if an energy manager is connected)
–
Account used (if an account was selected during
active charging)
The Web Application offers the option of exporting
the charge history as an Excel file.
1. Select Export charging history .
2. Navigate to the desired storage location and
save the file.
Information
For each active charging process, the Work and Pri-
vate accounts are available to select for evaluation
purposes. You can select the account in the informa-
tion on the current Charging process ( i symbol in the
menu bar) on the charger. Your choice is also applied
during the next charging process, so you need to
change it if required.
Connections
To access the charger Web Application, its informa-
tion and settings, your device and the charger must
be in the home network (via WiFi or a PLC connec-
tion). All the functions of the Web Application can
be used via the Internet connection of the home net-
work.
If there is no home network available at the place of
use, your device (PC, tablet or smartphone) can log
into the charger directly via its WiFi hotspot. How-
ever, in this case there is no Internet connection, and
only locally installed functions are available.