Porsche 9Y0.971.675.BE, Driver Manual, Page: 72 / 1111

70
DANGER
Charging
Charging instructions
Vehicle charge port
For information on connecting and disconnecting the
vehicle cable to and from the vehicle charge port and
for the charging and connection status at the vehicle
charge port:
g
Refer to the Driver’s Manual.
Electric shock, fire
Risk of serious or fatal injury due to fire or electric
shock.
e
Always observe the specified order for the
charging procedure.
e Do not unplug the vehicle cable from the vehicle
charge port during charging.
e End the charging process before disconnecting
the vehicle cable from the vehicle charge port.
e
Do not disconnect the charger from the electrical
socket during charging.
Errors are shown on the display and are indicated by
red status LEDs. The error message, the cause and a
remedial measure are displayed.
e Refer to chapter "Malfunctions" on page 80.
Charging times
The charging duration can vary depending on the
following factors:
– Electrical socket used (household electrical out-
let or industrial electrical outlet)
– Country-specific mains voltage and electric cur-
rent
– Settings for limiting the charging current on the
charger
–
Fluctuations in the mains voltage
–
Ambient temperature of vehicle and charger.
Charging times may be longer if the temperature
is at the limits of the permitted ambient temper-
ature.
g
Refer to chapter "Activating and deactivating
ground monitoring" on page 71.
– Temperature of the high-voltage battery and
control unit
– Passenger compartment precooling/heating ac-
tivated
– Current-carrying capacity of the power plug and
vehicle plug
Information
Due to different national mains supply systems, var-
ious cable versions are supplied. This may result in
the full charging power not being available. Further
information is available from your Porsche partner.
Starting, pausing and ending charging
Starting charging
1. Insert the plug into the electrical socket.
Power button lights up white.
Status LEDs light up white.
🡆
The display switches on.
2. Insert the vehicle plug in the vehicle charge port.
Power button lights up white.
Status LEDs pulsate white.
For information on connecting the vehicle cable
to the vehicle charge port:
g Refer to the Driver’s Manual.
🡆
Following a successful self-test and when
the connection is established, the status
LEDs light up white.
3. Charging starts automatically.
Power button lights up white.
Status LEDs pulsate green.
4. After a few minutes, the charger switches to
standby mode.
🡆
The vehicle starts charging.
Information
−
Charging is controlled by the vehicle. Charging
can only be stopped on the vehicle.
−
Unless the charger is in standby mode, the
charge status is shown on the display. The dis-
play can be switched on again by pressing the
Power button .
− An overtemperature switch-off feature prevents
overheating while charging.
Pausing charging
Charging is controlled by the vehicle and may occa-
sionally be paused, e.g. to optimise power consump-
tion.
A pause in charging is indicated on the control unit:
– Power button lights up white.
Status LEDs flash blue.
The display switches on.
The vehicle starts charging again automatically.
Charging can be stopped on the vehicle.