Porsche 9Y0.971.675.BE, Driver Manual, Page: 70 / 1111

68
3. Enter the PIN again and confirm.
🡆
Activation of the PIN prompt is confirmed.
Completing installation
e Using the Review , check the settings you en-
tered and complete the installation.
Start-up with the web application:
Before the charger and Web Application can be
put to everyday use, the charger must first be set
up. Next, a connection needs to be established be-
tween your device (PC, tablet or smartphone) and the
charger.
Requirements for initial start-up in the web
application
Have the following information to hand when using
the Web Application for the first time:
– Access data letter of the Porsche Mobile Charger
Connect for logging into the Web Application of
the charger
– Access data for your home network
– Access data for your user profile (to link it with
your Porsche ID)
Requirements for initial start-up in the web
application
Have the following information to hand when using
the Web Application for the first time:
– Access data letter of the Porsche Wall Charger
Connect for logging into the Web Application of
the charger
–
Access data for your home network
–
Access data for your user profile (to link it with
your Porsche ID)
The web application supports the following browsers:
– Google Chrome version 57 or later (recommen-
ded)
–
Mozilla Firefox version 52 or later (recommen-
ded)
–
Microsoft Internet Explorer version 11 or later
– Microsoft Edge
– Apple Safari version 10 or later
Logging into the charger
Information
You will find the data for logging into the charger
in the enclosed letter containing access data. The se-
curity field contains the access codes (PIN and PUK).
This field has special ink covering these codes.
The codes are only visible when this field is mois-
tened in running water.
Do not rub or scratch the field while moistening it, as
the codes could also be damaged.
b
The charger is switched on.
b The letter containing access data is to hand.
1. Find out the PIN from the letter. To do so, mois-
ten the security field to make the PIN visible.
2. Enter the PIN.
Starting setup on the charger
The charger is set up using the setup wizard, which
guides you through the steps involved in installation.
Setup must be complete before the charger can be
used correctly.
g Refer to the Porsche Mobile Charger Connect Oper-
ating Manual for details about setting up the charger.
Overview
The Web Application offers more extensive setting
options than the charger.
Fig. 39 Dashboard of the web application
A
Current charging process
Shows information on the current charging proc-
ess, such as the start time and duration of charg-
ing.
B
Device status