background image

En

glish

5

FCC INFORMATION

Warning: 

•  This equipment should be installed and 

operated with minimum distance 20cm 

between the radiator & your body.

•  Changes or modifications to this unit not 

expressly approved by the party responsible 

for compliance could void the user’s authority 

to operate the equipment. ”

NOTE: 

This equipment has been tested and 

found to comply with the limits for a Class 

B digital device, pursuant to Part 15 of 

the FCC Rules. These limits are designed to 

provide reasonable protection against harmful 

interference in a residential installation. This 

equipment generates, uses and can radiate 

radio frequency energy and, if not installed 

and used in accordance with the instructions, 

may cause harmful interference to radio 

communications. 
However, there is no guarantee that interference 

will not occur in a particular installation.  If this 

equipment does cause harmful interference 

to radio or television reception, which can be 

determined by turning the equipment off and 

on, the user is encouraged to try to correct the 

interference by one or more of the following 

measures:

•  Reorient or relocate the receiving 

antenna. 

•  Increase the separation between the 

equipment and receiver. 

•  Connect the equipment into an outlet on 

a circuit different from that to which the 

receiver is connected. 

•  Consult the dealer or an experienced 

radio / TV technician for help. 

This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following two 

conditions:

 

(1)  this device may not cause harmful 

interference, and 

 

(2)  this device must accept any 

interference received, including 

interference that may cause undesired 

operation. 

IC Notice:

This device contains licence-exempt 

transmitter(s)/receiver(s) that comply with 

Innovation, Science and Economic Development 

Canada’s licence-exempt RSS(s). Operation is 

subject to the following two conditions:
1.   This device may not cause interference.

2.   This device must accept any interference, 

including interference that may cause 

undesired operation of the device.

Compliance

This product complies with the radio 

interference requirements of the European 

Community.

Hereby, TP Vision Europe B.V. declares that this 

product is in compliance with the essential 

requirements and other relevant provisions of 

Directive 2014/53/EU.

You can find the Declaration of Conformity on 

https://www.porsche-design.com.

Summary of Contents for PDB70/00




















Reviews: