background image

En

glish

9

•  Do not mix new batteries with old ones.
•  Never recharge a battery unless it is 

confirmed to be a rechargeable type. 

Placement

For best results, place your subwoofer as shown 

below.

Wall mount

Note

 •

Improper wall mounting may result in accident, injury or 

damage. If you have any query, contact Consumer Care 

in your country.

 •

Before wall mounting, make sure the wall can support 

the weight of your Soundbar.

 •

Before wall mount, you need not remove the rubber 

feet at the bottom of the Soundbar, otherwise the 

rubber feet cannot be fixed back.

 •

Depending on the type of wall mounting your Soundbar, 

make sure that you use screws of a suitable length and 

diameter.

 •

Please check whether the USB port on the back of the 

Soundbar is connected to a USB device. If it is found 

that the connected USB device affects the wall-mount, 

you need to use another USB device of the appropriate 

size.

b. Place the whispering wall on the TV rack

If your TV has a base (such as Philips Porsche 

Design TV 70PD9000 TV), you can place the 

whispering gallery on the TV base.

Use a screwdriver (not included) to remove 

the 4 screws behind the whispering wall.

Remove the aluminum base of the 

whispering wall.

 »

Keep the newly removed screws and 

aluminum bottom in case you need to 

use them again.

Place the main body of the whispering 

gallery on the TV rack.

1

2

3

Summary of Contents for PDB70/00




















Reviews: