En
glish
15
• Make sure your router is turned on and
working properly. Write down the name
and password of the home network.
• Make sure the unit is turned on. Switch the
network status by long pressing the
(Wi-Fi) button on the back of the unit, and
observe the Wi-Fi light on the front of the
unit to determine.
Wi-Fi LED indicator (Yellow)
LED State
Status
Blink
Wi-Fi AP mode
Double blink
WPS is active
Constant on
Connected / Pairing successful
Wireless Network Setup
2
Turn on the Wi-Fi function on the
smartphone and connect to the Wi-Fi
network.
3
Press and hold for 8 sec of
(Wi-Fi)
button located at the back cabinet to reset
the Wi-Fi connection.
4
Until the second chime can be heard.
5
The wifi light on the top panel is changing
from fast Blink (Attempting to connect
or connecting to a Wi-Fi router) to Slow
Pulse (Setup Mode)
6
Set up the Soundbar with Play-Fi app
»
The wifi light on the top panel is
changed to solid when the connection
is successful.
7
Open the Play-Fi app. Upgrade to latest
firmware version when first time set up.
Note
•
Always upgrade the Soundbar with latest firmware
version to improve the functionality and features of the
Soundbar.
8
After connection, you can change the
device name to your custom name.
Otherwise, it follows the default name.
9
When the first time set up is not
successful, you need to step out of Play-Fi
app and restart the app again. Start the
set up again.
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your Soundbar speakers.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 4.2 + EDR.
• The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press the button repeatedly on the
unit or on the remote control to switch the
Soundbar to Bluetooth mode.
» NO BT
is displayed on the display
panel.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Porsche Design PDB70
to start
connection (see the user manual of
the Bluetooth device on how to enable
Bluetooth).
3
Wait until you hear the voice prompt from
the Soundbar.
»
If the successfully connected,
BT
is
displayed on the display panel.
4
Select and play audio files or music on your
Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
