10
Suggested wall mounting height
You are recommended to install the TV first
before wall mounting the soundbar. With a
TV preinstalled, wall mount the soundbar
50mm/2.0’’ in distance from the bottom of the
TV.
1
Drill 4 parallel holes (Ø 3-8mm each
according to wall type) on the wall. The
distance between the holes should be
481mm / 18.4”.
»
You can using the positioning paper
(included).
2
Firmly fi x 1 dowel into each hole in the
wall if necessary. Tighten the wall mount
brackets on the wall with screws and
screwdriver (not included). Make sure that
they are securely installed.
»
Attach the wall brackets (x2) to the
wall.
3
Install the wall mounting screws into the
back of the unit.
4
Lift the unit onto the wall mount brackets
and slot into place.
481 mm / 18.4"
~50mm/2.0"
1
2
3
4
3 Connect
This section helps you connect your Soundbar
to a TV and other devices, and then set it up.
For information about the basic connections of
your Soundbar and accessories, see the quick
start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Dolby Atmos®
Dolby Atmos gives you amazing experience you
have never heard before by overhead sound,
and all the richness, clarity, and power of Dolby
sound.
For using Dolby Atmos®
Dolby Atmos® is available only in HDMI mode.
For the details of the connection, please refer to
“
HDMI Connection
”.
1
To use Dolby Atmos® in HDMI 1 /HDMI 2
/ HDMI ARC mode, your TV has to support
Dolby Atmos®.
2
Make sure that “No Encoding” is selected
for bitstream in the digital audio output of
the connected external device (e.g. Blu-
ray DVD player, TV etc.).
3
While entering Dolby Atmos / Dolby
Digital / PCM format, the soundbar will
show DOLBY ATMOS / DOLBY AUDIO /
PCM AUDIO.
