PolyVision eno User Manual Download Page 53 | Manualshive

Page: 53 / 63

background image

PolyVision

48

Technical support

Technical support

If reviewing the above sections fails to resolve your hardware or driver
problem, contact PolyVision USA Technical Support:

Ŗ

Phone: 1.800.620.7659 (POLY), 678.542.3100

24-hour support Monday through Friday.

Ŗ

E-mail: [email protected]

Ŗ

Internet: www.polyvision.com

Or, outside the USA contact PolyVision Europe/Asia Technical Support:

Ŗ

Phone: +32 (0)89 32 31 30

Ŗ

E-mail: [email protected]

Ŗ

Internet: www.polyvision.com

Compliance

FCC compliance

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.

CE compliance

ēno has been tested and found to comply with safety, radiation, and
immunity standards defined in:

2006/95/EC Low Voltage Directive
EN60950-1:2001 (Safety)

«
...
51
52
53
54
55
...
»

Summary of Contents for eno
































































Reviews:

No comments

Related manuals for eno

Brand: Prima Pages: 30

D-LCH75-MC410-B

Brand: Dahua Technology Pages: 40

Brand: Brother Pages: 18

Brand: VSON Pages: 13

Brand: Grandview Pages: 4

Supernova Flex Classic

Brand: DNP Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands