PolyVision
25
Getting started in projection mode
3. Using the ēno stylus, touch each target projected on the
whiteboard, following instructions you see on the board.
When alignment is complete, you are ready to begin interacting with your
computer.
The alignment between your projector and the PolyVision driver is
important. PolyVision offers three levels of alignment: good, better, best.
The default is “better” alignment. If you need to change the
correspondence between the position of the cursor and the point of
contact when you tap the whiteboard, refer to “Choosing alignment
accuracy” on page 42.
To exit projection mode:
Ŗ
Tap the projection mode control icon again.
