PolyVision
20
Preparing to use ēno
Preparing to use ēno
ēno is ready to use after you:
Ŗ
add batteries to the stylus
Ŗ
pair the stylus Bluetooth signal with a computer that has the PolyVision
driver installed (refer to “Install the PolyVision driver” on page 17)
Ŗ
connect a projector to the computer
Add batteries
The ēno stylus and eraser require batteries.
Install the ēno stylus battery
The ēno stylus requires one AAA battery (provided).
To install the battery:
1. Open the battery compartment.
2. Insert the battery.
3. Replace the battery compartment lid.
Power on and off the stylus
To turn the ēno stylus on and off:
Ŗ
Remove and replace the stylus cap.
