Polyvend ULTRA VENDOR 32, Service Manual

Page: 10 / 53

SPECIAL PRODUCT LOADING
NARROW PRODUCT LOADING
In order to keep narrow products positioned properly the use of one of the spacer guides
may be required. For additional guides order part no. 23170.
To install the guide, press on to the tray divider as shown in Figure 2 below.
FIGURE 2
FLAT OR SEMI-FLAT BOTTOM PRODUCT LOADING INSTRUCTIONS
Note: Instructions apply to candy tray only.
Certain candies and cigarettes have a flat or semi-flat bottom which is thick and wide.
Polyvend Inc. has designed into our helix the flexibility to be 100% sure of the vending
of this type of product. By moving the position of the helix, and thus the helix kicker 90
degrees, the best dispensing for boxed products is insured. You simply unlock the helix
by pulling helix out of position. Turn the helix counterclockwise 95 to 100 degrees, then
engage and push helix in, to lock in place. The helix should then be in the position shown
below in Figure 3.
CANDY HELIX
KICKER 90 DEGREES FROM NORMAL FOR
THICK OR BOX TYPE PRODUCT.
I
FIGURE 3
7