Polycom ViewStation FX, User Manual

Page: 145 / 220

Chapter 4 Advanced Configuration
© Polycom, Inc. 131 ViewStation FX/VS 4000 User’s Guide
Setup
Select the Setup icon to access the Global Management screen.
Figure 4-30. Global Management Screen
You can set the following options from this screen.
• Allow Remote Monitoring —Enable this option to allow the
system administrator to view a call or view the room where the
ViewStation FX or VS4000 camera is installed.
For privacy reasons, you can enable this option only from the
near site ViewStation FX or VS4000.
Users with a ViewStation FX or VS4000 in their private office
might not want the system administrator to be able to view their
office at any time. For example, if a user was holding a private
meeting, they might want to disable remote monitoring.
If you do not enable the Allow Remote Monitoring option, you
cannot request help by pressing INFO twice on the ViewStation
FX or VS4000 remote control, and you cannot add a system to
GMS by entering the global manager IP address and restarting
the ViewStation FX or VS4000. You need to add the ViewStation
FX or VS4000 through GMS.
• Time difference from GMT —Enter the time difference from
where the ViewStation FX or VS4000 is installed and Greenwich
Mean Time (GMT). This allows the global manager to view the
local time of the managed ViewStation FX or VS4000.
• Daylight Savings Time —Enable this option if the area where
the ViewStation FX or VS4000 is installed participates in
Daylight Savings Time.