manualshive.com logo in svg

Polycom ViewStation FX, User Manual

The Polycom ViewStation FX is a high-quality video conferencing solution that enables seamless communication. Get started swiftly with the Quick Start manual, available for free download at manualshive.com. Gain easy access to insightful instructions and optimize your experience with this exceptional product.

Share
Download
background image

Chapter 1

Getting Started

©

 Polycom, Inc.

11

ViewStation FX/VS 4000 User’s Guide

connector for the serial link to the back panel of the 
ViewStation FX or VS4000. A HD-44M to DB-25F adapter 
cable is available as an option to connect existing V.35 
network cables, if necessary.

For connection to your DCE, Polycom offers the following optional 
cables:

•

V.35 “Y” Cable—HD-44M to DB-25M/RS-366 and M34 
“Winchester” V.35 

•

RS-449/422 “Y” Cable—HD-44M to DB-25M/RS-366 and 
DB-37M/RS-449/422

•

Ascend Cable—HD-44M to HD-44M

Cable drawings and pinout information for these cables are 
available in the 

Advanced V.35 Configuration

 section of Chapter 4, 

Advanced V.35 Configuration

. 

The V.35 connection on the V.35 cable, is used for data and the 
RS-366 connection is used for dialing. If you plan to place 2x56 kbps 
or 2x64 kbps calls, you will use one cable for each port.

Note

If your DCE does not use dialing, do not use the RS-366 
(DB-25M) connector.

To connect to the network devices:

1.

Connect the HD-44 male cable ends to Ports 1 and 2 on the 
network interface module. If you want to connect only one cable, 
connect to Port 1 on the interface module. 

2.

Tighten the screws on the connectors.

3.

Connect the remaining cable ends to the DCE's V.35/RS-449 
port and the DB-25 RS-366 dialing port, if used. If you are 
connecting only one cable, connect to the lowest ordered port 
on your DCE.

4.

Tighten the screws on the connectors.

5.

Power on the television monitor.

6.

Power on the ViewStation FX or VS4000.

Note

Once you power up the system, there is a 20-second delay 
before you see the Polycom logo.

Summary of Contents for ViewStation FX





























































































































































































































Reviews:

No comments

Related manuals for ViewStation FX

Harman JBL L75ms Quick Start Manual preview
JBL L75ms
Brand: Harman Pages: 10
RADVision SCOPIA 400 Platform Manual preview
SCOPIA 400
Brand: RADVision Pages: 39
QNAP KoiBox-100W Quick Start Manual preview
KoiBox-100W
Brand: QNAP Pages: 35
WAREMA LONMSE 2M230I Operating And Installation Instructions preview
LONMSE 2M230I
Brand: WAREMA Pages: 4
Water Furnace IntelliZone2 MasterStat Specification Catalog And Design Manual preview
IntelliZone2 MasterStat
Brand: Water Furnace Pages: 44
HEIDENHAIN LIP 471R Mounting Instructions preview
LIP 471R
Brand: HEIDENHAIN Pages: 32
ENTRYPASS EP.MINI Wiring Manual preview
EP.MINI
Brand: ENTRYPASS Pages: 27
RADVision SCOPIA XT MCU series Administrator'S Manual preview
SCOPIA XT MCU series
Brand: RADVision Pages: 43
Grundig scd 5290 rds Service Manual preview
scd 5290 rds
Brand: Grundig Pages: 34
ClearOne Converge Pro Manual preview
Converge Pro
Brand: ClearOne Pages: 48
JVC KD-SX950 Service Manual preview
KD-SX950
Brand: JVC Pages: 51
Sharp XL-560H Operation Manual preview
XL-560H
Brand: Sharp Pages: 32
THOMSON MIC192U Manual preview
MIC192U
Brand: THOMSON Pages: 68
Revolabs 10-FLX2-002-POTS System Manual preview
10-FLX2-002-POTS
Brand: Revolabs Pages: 57
FlySky FS-BS6 Quick Start Manual preview
FS-BS6
Brand: FlySky Pages: 2
Niles MVC100IR Installation & Operation Manual preview
MVC100IR
Brand: Niles Pages: 25
Denver MCA-171 Instruction Manual preview
MCA-171
Brand: Denver Pages: 9
Denver MCA - 150 Instruction Manual preview
MCA - 150
Brand: Denver Pages: 17

Brands by name

Popular brands

Load more brands