Polycom SoundPoint IP 550 User Manual Download

Page: 43 / 96

Customizing Your SoundPoint

IP 550 Desktop Phone

2 - 21

Use

and

to highlight the contact.

You can also use the * key to page up and the # key to page down.

Press the

Edit

soft key, and then scroll down to the Divert Contact field.

Enter the number of the party to whom you want to divert the call.

Scroll down to the Auto Divert field.

Use the

and

to select Enabled.

Press the

Save

Cancel

soft keys to accept or cancel changes.

Press

to return to the idle display.

System Customizations

The following section details customizations of your SoundPoint IP 550 phone

that are performed by your system administrator.

Supporting Multiple Lines

Your SoundPoint IP 550 phone can support up to 8 lines.
Typically, the top-most Line Key is reserved for the principal directory

number (DN) of the phone.
Depending on how your administrator sets up your phone, the display could

resemble one of the following figures:

Summary of Contents for SoundPoint IP 550

































































































Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands

Polycom SoundPoint IP 550, User Manual

Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands