Polycom SoundPoint IP 550 User Manual Download

Page: 19 / 96

Getting Started with Your SoundPoint

IP 550 Desktop Phone

1 - 11

Speaker

For ringer and hands-free audio
output.

Soft Keys

These keys are automatically labeled
to identify their context-sensitive
functions.

Graphic Display

Shows information about calls,
messages, soft keys, time, date, and
other relevant data.

•

Caller display information—first
party, second party, number of
calls

•

Information display line (in order
of precedence highest to lowest)

• Popup text (for example,
network errors)
• Do Not Disturb text
• Missed call text or second
incoming caller display
• Prompt text (for example, “Enter
number”)
• Time and date text (if idle
display is not used for time/date
display)

Associated line icons are described in
the following table.

Line/Speed Dial Key

Use these keys to activate up to four
lines or speed dials that can be
assigned to your phone.

Line Indicators

Individual multi-color LEDs display
the dynamic call state and remote
user status (busy lamp field (BLF)
and presence). The mapping is:

•

Solid green—An active call is in
progress.

•

Fast flashing green—There is an
incoming (ringing) call.

•

Flashing green—The call is held
by the other party.

•

Flashing red—The call is on hold.

•

Solid red—The line is busy
remotely (shared lines)

Hookswitch

Item

Description

Summary of Contents for SoundPoint IP 550

































































































Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands

Polycom SoundPoint IP 550, User Manual

Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands