Polycom SoundPoint IP 550 User Manual Download

Page: 18 / 96

User Guide SoundPoint IP 550 Phone

1 - 10

Feature Keys

Access important features using
these keys.

Access to local directories and call
lists.

Access to special applications
(contact system administrator).

Allows connection with multiple other
parties for a conference.

Transfer of current call to third party.

Dials most recently dialed party.

Access local (your phone) and global
(your organization) features.

Access and manage text and voice
messages.

Cancels ringing and directs incoming
calls to your voice mail (if supported).

Microphone Mute

Mutes audio transmission locally
during calls and conferences.

Headset

Allows you to place and receive calls
through an optionally connected
headset.

Speakerphone

Allows for hands-free communication
during calls.

Hands-free Microphone

Picks up audio during hands-free
calls. Place your phone on a hard, flat
surface for best results.

Volume Keys

Adjusts the volume of the handset,
headset, speaker, and ringer.

Dial Pad

Provides the 10 digits, the alphabetic
characters, and special characters
available in context-sensitive
applications.

Hold

Holds an active call or resumes a
held call.

Item

Description

Summary of Contents for SoundPoint IP 550

































































































Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands

Polycom SoundPoint IP 550, User Manual

Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands