Polycom SoundPoint IP 550 User Manual Download

Page: 80 / 96

User Guide SoundPoint IP 550 Phone

4 - 8

For

Access

, use

and

to select Enabled.

When

Access

is enabled, you are allowing the contact to see your presence.

When

Access

is disabled,you are disallowing the contact from seeing your

presence.
The default for access is Disabled.

Press

to return to the idle display.

For more information on contacting buddies, refer to

Placing Calls

on page

3-2

or the Microsoft Office Communicator and Windows Messenger

documentation.

Restarting Your Phone

Periodically, you may need to restart your phone so your phone can accept a

new configuration.

To restart the phone:

Press

Select

Settings > Basic > Restart Phone

“Are you sure?” appears on the screen.

If you still want to restart your phone, press the

Yes

soft key.

The restart process begins. The process ends when the idle screen appears.

Note

If your phone malfunctions, you may be able to restore normal operation without
restarting it. Before you restart your phone, contact your system administrator.

Note

Call lists are automatically cleared when you restart the phone.

Summary of Contents for SoundPoint IP 550

































































































Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands

Polycom SoundPoint IP 550, User Manual

Search results

Summary of Contents for SoundPoint IP 550

Reviews:

Related manuals for SoundPoint IP 550

Brands by name

Popular brands