7.6
FINAL DRIVE
9923523 - 2012
RANGER
RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
FRONT DRIVE SHAFT
Drive Shaft Removal
1. Elevate front of veh icle and safely su pport machine
under the frame area.
2. Remove th e (4 ) whe el nuts and remove th e fro nt
wheel.
3. Remove the cotter pin and loosen the front wheel hub
castle nut. Rem ove th e n ut, and (2) co ne washers
from the front wheel hub assembly.
4. Remove th e tw o fr ont b rake caliper mo unting bo lts
and r emove th e calip er from the bra ke disc (see
Chapter 9).
CAUTION:
Do not hang the caliper by the brake line.
Use wire to h ang caliper to prevent damage to the
brake line.
5. Remove the front wheel hub assembly.
6. Remove the upper ball joint pinch bolt.
7. Using a soft faced hammer, lightly tap on the bearing
carrier while removing the upper ball joint end.
8. Remove the drive shaft from the front bearing carrier.
9. With a short, sharp jerk, remove drive shaft from the
front gearcase.
CAUTION
Serious injury may result if machine tips or falls.
Be sure machine is secure before beginning this
service procedure. Wear eye protection when
removing bearings and seals.
Castle Nut
Cotter Pin
Cone
Washers
Pinch
Bolt
Summary of Contents for 2012 RANGER RZR 570
Page 4: ......
