7.5
FINAL DRIVE
7
9923523 - 2012
RANGER
RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
5. Install front wheel hub assembly, cone washers, and
hand tighten th e ca stle nut. Insta ll washers with
domed side out.
6. Install b rake caliper mo unting bo lts a nd torque to
specification.
7. Install the steering tie rod end onto the front bearing
carrier.
NOTE: Refer to the photos below to ensure proper
placement of the tie rod end.
8. Torque the tie r od end fastener to spe cification and
install a
new
cotter pin.
9. Torque wheel hub nut to specification and install a
new
cotter p in. Tigh ten n ut slightly if ne cessary to
align cotter pin holes.
10. Install wheel and (4) wheel nuts. Torque wheel nuts
to specification.
11. Rotate wheel and check for smooth operation. Bend
both en ds of cotte r pin around end of sp indle in
different directions.
=
T
Front Caliper Mounting Bolts:
31-34 ft. lbs. (42-46 Nm)
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
Out
Cone Washers
Wheel
Hub
42.5 ft. lbs.
58 (Nm)
Tie Rod End
=
T
Tie Rod End Fastener:
42.5 ft. lbs. (58 Nm)
=
T
Wheel Hub Castle Nut:
80 ft. lbs. (108 Nm)
=
T
Wheel Nuts:
Steel Wheels: 27 ft. lbs. (37 Nm)
Aluminum Wheels: 30 ft. lbs. + 90° (1/4 turn)
80 ft. lbs.
NEW Cotter Pin
(108 Nm)
Summary of Contents for 2012 RANGER RZR 570
Page 4: ......