7.4
FINAL DRIVE
9923523 - 2012
RANGER
RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Bearing Installation
5. Thoroughly clean th e fro nt bea ring car rier ho using
and the outer race on the new bearing. Be sure that
all oil residue has been removed from each surface.
6. Support the bottom of the bearing carrier housing.
7. Apply
Loctite
®
60 3
™
retaining comp ound to the
outer circumference of th e ne w bearing r ace and
carefully pr ess the ne w b earing into the b earing
carrier housing.
NOTE: Use ca re to not allow any of t he L octite®
compound to get in the bearing.
8. Wipe the housing clean of any excess compound and
install the snap ring.
Bearing Carrier Installation
1. Install drive shaft axle through th e b ackside o f the
bearing carrier.
2. Install the upper and lower ball joint ends into the front
bearing carrier.
3. Install pinch bolts and torque to specification.
4. Apply grease to drive shaft axle splines.
CAUTION
Use an arbor and press only on the outer race,
otherwise bearing damage may occur.
Apply
Loctite® 603™
Bearing
Snap Ring
=
T
Ball Joint Pinch Bolts:
23 ft. lbs. (31 Nm)
23 ft. lbs.
(31 Nm)
Summary of Contents for 2012 RANGER RZR 570
Page 4: ......
