20
21
EN
– Installation and operation guide SIMPLE MOVE 102
EN
– Installation and operation guide SIMPLE MOVE 102
EN
EN
1.3 Toothed bar assembly
1.
Check whether the drive is really
unlocked when the lever
is in the position.
2.
Insert the pins (12x60 S12). Tighten
the double-thread screws (M10x15).
3.
Assembly of the bars should start from
the lock side.
4.
Insert bar No. 1 at a suitable distance from
the lock side.
5.
Fix the toothed bar to bar No. 1
b
and fasten
using screws M6x50. Fasten the
fi
rst bar
in such a way as to feel slight resistance.
6.
Level the bar. The bars No. 1 – No. 4 have
bean-shaped elements for horizontal
adjustment; the toothed bars can be adjusted
vertically.
7.
Fasten the rest of the toothed bars
to the bar No. 1.
The last toothed bar on the bar No. 1
will connect the bars No. 2 and No. 1.
8.
Fasten the subsequent bars and toothed bars
as shown above.
9.
Once the bars are fastened, check whether
everything is level or not; if not, correct this.
77
11
-
0
4
No.1
No.2
No.3
No.4
1
Bar No. 4
Bar No. 3
Bar No. 2
Bean-shaped
element for
horizontal
adjustment
Bean-shaped
element for
vertical
adjustment
Bar No. 1
Toothed
bar
Screw M6x50
Washer M6
Start of assembly
lis
