Polargos EASY WAY201, Manual

Page: 27 / 40

27
GB
3V
CR 2032
+
Operational use
Operation of lighting
Zone lighting is turned on every time the drive is activated. The light goes out automatically two min-
utes after the gate movement is finished (if the system is supplied from the mains) or 30 seconds (if the
system is supplied from the solar energy source).
Battery replacement
● Slide the remote control latch forward and lift the cover.
● Remove the battery using a screwdriver and replace it
(3 V CR 2430 or 3 V CR 2032).
Battery life is usually 2 years.
Waste batteries are to be returned to their distributor or
transported for disposal.
Operational use of the remote control
If a vehicle is equipped with air-conditioning and metalized windscreen, aim the remote the control at
the black bar found on the windscreen or at the side window.
Engagement / disengagement of the servomotor
For safety reasons, these operations must be carried out after disconnecting the power
supply. Even in the case of a power cut, restoration of power supply can occur at any
moment.
1. In case of power failure, the gate can be
opened as follows:
- using the emergency battery, see page 31;
- by disengagement of the servomotor
mechanically.
Unlock the driving mandrel by turning the
unlocking element. Pull up the servomotor
to advance the driving mandrel from
the holder fastening the leaf. 2. To engage the servomotor safely, lock the
unlocking element in the locking position
using a padlock (not included in the kit).