17
GB
126
70
2
Electrical connections
Stages:
●
Location of the electrical box on the post.
●
Fastening of the electrical box on the post.
●
Connection of the two servomotors.
●
Connection of the antenna.
●
Connection to the mains or solar system.
Location of the electric box on the post.
The box should be mounted on the same side as the source of power supply.
Fixing the electrical box on the post.
1. Place the box at the post (preferably over
one meter above the ground) and use the
template to drill installation holes.
2. Put the electronic system in the box. Press
it slightly for proper location. Fix the system
using the mounting screws included in the
delivery kit.
The box shall be mounted with the gland facing downward. The cables will be introduced from below
(as shown in the picture).
Summary of Contents for EASY WAY201
