Polargos EASY WAY201, Manual

Page: 20 / 40

20
GB
3
Parameter setting
Stages:
● Explanation of symbols.
● Programming the remote control.
● Leaf path teaching.
● Automatic mode adjustment.
● Switchover from automatic mode to sequential mode.
● Approval of settings.
Explanation of symbols.
Long pressing
above 0.5 s Indicator is flashing
Short pressing
below 0.5 s Indicator is lit
Programming of remote controls.
Before the system parameters are entered, check if the indicators ON/OFF and PROG are lit and the
indicator DANGER is unlit. Carry out the following operations:
Operation of remote controls
The drive unit can be controlled by means of one or several remote controls.
The following operations must be repeated for each remote control to be programmed.
Two operating modes are available for the drive unit:
9
Complete opening only
Complete opening of 2 leaves by short or
long pressing of the remotecontrol push-button.
9
Opening for pedestrian entry or
complete opening
Opening of one leaf only by short pressing of the
remote control push-button to allow pedestrian
entry.
Complete opening of 2 leaves by longer
pressing of the remote control push-button.