7
Please follow the procedures below to install the hard disk drive:
1. Use a screwdriver to open the cover located on the side of the Server.
2. Connect the IDE or SATA adaptor and the power source.
3. Slide the hard disk drive into the slot.
4. Tighten the two screws firmly on the side of the hard disk drive to secure the hard disk
drive.
5. Close the lid. Tighten the screw to secure the cover.
Installing the Foot Stand
Place the Server upside down and follow the steps below to install the foot stand:
1. Aim the tabs on the foot stand at the notches on the bottom of the Server, with the
arrow on the foot stand toward the front panel of the Server.
2. Insert the tabs on the foot stand into the notches on the bottom of the Server.
3. Press the foot stand toward the front panel of the Server until it snaps into place.
Summary of Contents for MULTI-FUNCTIONAL SERVER
