E-44
Use a printer (sold separately) to print the data on the sheet surface. Use a PLUS-designated printer.
Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operat-
ing instructions.
Preparing the Printer
Please check that the NETWORK FLIPCHART and the printer have been connected. See Page E-52.
Printing (printer sold separately)
Set the paper.
Please use A4 or letter size printer paper.
• When using letter size paper, set letter size paper in the
device settings. (See page E-15, E-22.)
1) Arrange the paper edges so that they are even.
2) Insert paper at the specified position of the paper tray.
3) Press the paper guide gently until it touches the paper.
Note
See your printer’s operating instructions for a descrip-
tion of the paper that can be used.
Switch on the power.
Press the power switch. The power indicator lights.
This completes the preparation of the printer.
Press the Color Print or the B/W Print button on the NETWORK FLIPCHART’s control panel. One page worth of
data is read and the printing operation starts.
Notice
• Depending on the printer, it may take a while for the printer to get ready for printing after the power supply is
switched on.
In this case, see the printer’s operating instructions and check that the printer is ready before starting the printing
operation on the NETWORK FLIPCHART.
When finished printing...
Switch off the printer power and remove the paper.
Close the paper tray.
Notice
• Caution: Do not turn off the power or disconnect the USB cable during printing.
Discharge tray
Paper guide
Paper
Power switch
Appearance of printer is for illustration purposes.
Paper tray
Summary of Contents for NF-20
Page 53: ......
Page 54: ...26 5675 13E...
