E-38
Turn on the NETWORK FLIPCHART’s power and connect the PC dedicated USB port (type
B) and computer using the USB cable.
• Usually, with Windows XP/Windows Vista/Windows 7, the standard driver is installed automatically and the NETWORK
FLIPCHART is identified by the computer as a removable device.
When the NETWORK FLIPCHART and a computer are connected by USB cable, the NETWORK FLIPCHART is
recognized as an external memory device (removable device). Below is the procedure for copying the “CBIm-
age” file from this device onto the computer.
Images can be stored in JPEG (.jpg), PNG (.png) or PDF (.pdf) format, selectable in the NETWORK FLIPCHART
settings (“CB Setup”). (See pages E-14, E-22.) The factory default is “PNG”.
CAUTION
With this function, if the operation for disconnecting the USB connection between the NET-
WORK FLIPCHART and computer is performed or the NETWORK FLIPCHART’s power is
turned off, the image data in the NETWORK FLIPCHART’s computer storage memory is delet-
ed. Be sure to save important image data on the computer, etc.
Notice
• Only one screen’s worth of data can be stored in the NETWORK FLIPCHART’s memory for computer storage.
When the NETWORK FLIPCHART’s save operation is performed successively, previous data is overwritten.
• Do not store computer data in the NETWORK FLIPCHART’s memory for computer storage.
• The memory for computer storage cannot be formatted from a computer.
• Do not disconnect the USB cable or access the NETWORK FLIPCHART while data is being saved after pressing the NET-
WORK FLIPCHART’s Save
button. Doing so will cause the computer’s operation to become unstable.
• Do not press operation buttons on the NETWORK FLIPCHART while the NETWORK FLIPCHART’s memory for computer
storage is being accessed from the computer. Doing so will result in increased time for response between the computer and
NETWORK FLIPCHART, and operations may not be possible.
• When connected to a Macintosh computer, the warning message “The disk was not ejected properly.” is displayed, but the
data can be stored normally in the computer’s memory.
Using the NETWORK FLIPCHART connected to a computer
• After scanning (scrolling) of one or both sides of the sheet is completed*, the data is then stored in the PC storage
memory.
When the data is being saved in the PC storage memory, the displays in the display window will blink sequentially in a
clockwise direction.
* Differs depending on whether it is set up for single-sided or double-sided scanning. (refer to Page 32)
Display window
Press the Save button to store.
To USB port on computer
(type A)
USB cable included
with NETWORK
FLIPCHART
To NETWORK FLIPCHART’s
computer USB port (type B)
continued on next page
LEDs flash in circular motion during saving in memory for computer
storage
Summary of Contents for NF-20
Page 53: ......
Page 54: ...26 5675 13E...
