Plus CaptureBoard C-12S Service Manual Download Page 18 | Manualshive

Page: 18 / 68

background image

16

INSTALLATION OF THE SOFTWARE

4

Click “Finish”.
The “Installer Information Dialog Box” will be displayed.

Click “Yes (Y)” and restart the personal computer.

When this software is installed in the personal com-
puter for the first time, continue to make the following
connections and operations.

■

Installing the USB Driver

The USB driver is installed in the computer with the installer, but this does not complete association with the USB
port. In order to use PLUS TOOLBOX, install using the procedure described below with the Captureboard con-
nected.

Preparation 1. Press the ON/Standby button of the captureboard to turn on the power.

2. Use a USB cable to connect the USB port of the personal computer with the PC dedicated

USB port of the captureboard.
The New Hardware Search Wizard will be displayed.

Install according to the New Hardware Search Wizard.

1

Select “Install Software Automatically (Recom-
mended) (T)” and click “Next (N)” (when using Win-
dows XP).
Start the installation of the USB driver.
Note:

* Installation will be completed automatically with

Windows 2000/Windows Vista.

PLUS TOOLBOX - InstallShield Wizard

Cancel

Finish

< Back>

InstallShield Wizard Completed

The InstallShield Wizard has successfully installed
PLUS TOOLBOX, Click Finish to exit the wizard.

PLUS TOOLNOX Installer Information

You must restart your system for the configuration
changes made to PLUS TOOLBOX to take effect.
Click Yes to restart now or No if you plan to restart later.

No

Yes

2

Click “Finish”.
This software can now be used.

Found New Hardware Wizard

If your hardware came with an installation CD
or floppy disk, insert it now.

Install the software automatically [Recommended]

Install from a list or specific location [Advanced]

Click Next to continue.

Cancel

Next >

< Back>

This wizard helps you install software for:

PLUS Copyboard

What do you want the wizard to do?

Found New Hardware Wizard

The wizard has finished installing the software for:

PLUS Copyboard

［Click Finish to close the wizard

Completing the Found New
Hardware Wizard

Cancel

Finish

< Back>

«
...
16
17
18
19
20
...
»

Summary of Contents for CaptureBoard C-12S





































































Reviews:

No comments

Related manuals for CaptureBoard C-12S

Brand: Qomo Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands