13
FUNCTION SETTING
6-3. Factory Defaults
The "Settings" menu of the "PLUS TOOLBOX" software in the included CD-ROM can be used to change the
copyboard's settings.
For setting instructions, see the separate "Software Operating Instructions". Below are the setting items and
factory defaults.
* The date/time stamp can be displayed at the user's discretion as part of the header/footer data.
Upon shipment from the factory, only the time stamp is displayed.
Setting item
Description
Factory default
Color
Scanning color mode Color/Black & White
Black & White
Density
Scanning density Standard/Dark
Standard
Date/time setting
Set of the date and time for the time stamp
Japan Standard
Time
File Format
Sets the format of the images stored on the USB memory device.
PNG
JPEG/PNG/DF
Paper Size
A4/Letter
A4
Aspect Ratio
Sets the aspect ratio for printed images.
Match Paper Size
Original Image/Match Paper Size
Erase Reminder
Sheet rear surface erase reminder function: Disable/Enable
Disable
Restrict color mode
Setting for disabling printing/storing in the color mode
Disable
Selection of resolution for images stored in the memory and
Resolution
images transferred to the computer : Standard
Standard
Standard : 1/2 the vertical/horizontal size of the scanned image
High : 1/1 the vertical/horizontal size of the scanned image
Header/footer (date/
Upon shipment from factory :
time stamp)
Writing of date/time when printing/storing : Enabled/Disabled
Enabled
Original editing : Header/footer data output *
[Program updating during use of PC]
Equipment required (including software)
• Program file for C-12
• PC main set (USB terminal 1.1 or more: Software C-12 series PLUS TOOLBOX has been installed.)
• USB cable
1. Save a program file (example: c12_01_00) for C-12 in PC.
2. Display the main menu of software “PLUS TOOLBOX” in PC.
3. Pull out the power plug when the power plug of the main set is connected to the wall outlet.
4. Connect the power plug of the main set to the wall outlet while pressing and holding the “Feed” button.
5. “UP” blinks on the display window.
6. Click [Open file] and display the screen for opening a file.
7. Display an update file for C-12, select a file (example: C:XXXX.c12_01_00.mot), and click the [Open] button.
8. Click the [Update] button and start the updating of an internal program.
During program rewrite: The display window rotates during display. (Time required: Approx. two minutes)
9. Updating is completed when “AA” blinks on the display window. Click [Close] on the PC screen display for
termination.
10. Pull out the AC adaptor of the C-12 main set once, insert the AC adaptor again, and press the “Power” button
of the C-12 main set.
* Do not turn off the power during write operation.
* The indication on the display window may vary depending on the program version or IPL version of the main set.
6-4. Updating the Internal Program of a Main Set
Update an internal program from PC using software PLUS TOOLBOX or update a program using USB memory.
Rewrite a program in the procedure below using PC or USB flash memory (hereinafter referred to as USB
memory).
c12XX_XX.mot. Major version: XX/Minor version: XX
Example: c12_01_00.mot
• Connect PC, in which software PLUS TOOLBOX was installed, using a USB cable when updating the internal
program of this set from PC.
