14
FUNCTION SETTING
[Program updating during use of USB memory]
Equipment required (including software)
• Program file for C-12
• USB memory
1. Save a program (c12_01_00) in the route of USB memory.
2. Press the “Power” button of the C-12 main set to turn on the power and insert the USB memory into the USB
memory port.
3. The USB memory is recognized, a file is automatically detected, and the current software version shown on
the display blinks during updating. Display example: “01” ...
4. A program is updated when you press the “Save” button of the C-12 main set. (During program rewrite: The
display window blinks during display.)
5. A new program version is shown on the display when update is completed. Display example: “01”
6. Remove the USB memory and press the “Power” button of the C-12 main set to turn off the power.
7. Pull out the AC adaptor of the C-12 main set once, insert the AC adaptor again, and press the “Power” button
of the C-12 main set.
* Do not turn off the power during updating operation.
• Segment display “E.E.”: Indicates the state in which no sheet length and white level data exist.
In this case, perform calibration.
