Plum ecoMAX810P3-L TOUCH, Service And Assembly Manual

Page: 9 / 48

9
7 Structure – Main menu
** parameter is available only after activation
function by the boiler manufacturer
Boiler settings
Preset boiler temperature
Weather control the the boiler
Boiler heating curve
Curve shift
Output modulation
Fuel level
Burner cleaning
Lambda calibration*
Night time decrease boiler
Output modulation
Airflow power correction 100%
100% feeder work correction
50% H2 hysteresis
50% Airflow power correction
50% feeder work correction
30% H1 hysteresis
Airflow power correction 30%
30% feeder work correction
Boiler hysteresis
Regulation mode
FL airfl. correction
Minimum boiler output FL
Maximum boiler output FL
Stabilization time
HUW settings
HUW preset temperature
HUW pump mode
HUW cont. hysteresis
HUW disinfection
Automatic detection SUMMER mode
SUMMER mode act. temperature
SUMMER mode deact. temperature
Night time decrease HUW
HUW pump mode
OFF
Priority
No priority
Summer
Mixer 1-4 settings*
Preset mixer temp.
Mixer room therm.
Mixer out.temp.dep
Mixer heating curve
Curve shift
Room temp.factor
Mixer night temp red.
*) menu for all mixer cycles is identical
Regulation mode
Standard
FuzzyLogic
Manual control
Fan
Feeder
Boiler pump
Lighter
HUW pump
Feeder supply
Servo
Alarm
Feeder 2
Mixer1 Pump
Mixer1 Open
Mixer1 Close
Mixer2 Pump
Mixer2 Open
Mixer2 Close
Res.boiler
Fuel level
Alarm level
Fuel level calibration
* The specific menu items may not be visible in
the absence of a sensor, module or settings.
Main menu
Information
Boiler settings
HUW settings
Mixer 1-4 settings*
Work as scheduled**
General settings:

Clock

Date

Brightness

Sound

Language

Software update

WiFi*
Manual control
Alarms
Service Settings
Turn off/on the controller