9
8
Operating the regulator
This section briefly describes how the
regulator should be operated. In order to
start using a boiler with the regulator, you
must fire the boiler up using the regulator
mode LIGHT, and then switch the regulator
into the mode OPERATION.
8.1
Description of buttons
Drawing 1 View of control panel
Legend:
1.
MENU button
2.
„TOUCH and PLAY” knob
3.
EXIT button
Turning the “TOUCH and PLAY" knob
increases or decreased the edited parameter.
This is an element of quick operation of the
regulator. Pushing this knob allows to enter
the given parameter, or to confirm the
selected value.
8.2
Description of display main window
Drawing 2 display main window
Legend:
1.
regulator operation modes: STOP, LIGHT,
OPERATION, CONTROL,
2.
preset boiler temperature,
3.
measured boiler temperature,
4.
field of values which influence the preset
boiler temperature: ,,
T
” –
symbol of
decrease in the preset boiler temperature
due to disconnection of the room
thermostat contacts; „
I
”
symbol of
decrease in the preset boiler temperature
due to active intervals; „
W
” –
symbol of
increase in the preset boiler temperature
for the time of filling the domestic hot
water (DHW) tank; "
M
" - symbol of
increasing the preset boiler temperature
due to mixer cycle; "
O
" - weather control
for the boiler cycle enabled.
5.
airflow operation symbol
6.
fuel feeder operation symbol,
7.
central heating pump operation symbol,
8.
domestic hot water pump operation
symbol,
9.
measured temperature of domestic hot
water tank,
10.
preset temperature of domestic hot water
tank,
11.
clock and day of the week
12.
symbol of mixer extension module
MX.01, which allows support of two
additional heating cycles
13.
outside (weather) temperature,
14.
active fuzzy logic control symbol.
The domestic hot water window in the main
screen can be changed into a selected mixer
cycle using the TOUCH and PLAY knob.
Drawing 3 auxiliary window, note: the windows for
mixers 2 and 3 appear only if the additional mixer
module MX.01 is equipped.
8.3
Start-up of the regulator
The regulator is switched on by pressing the
“TOUCH and PLAY”
knob.
First,
an
information
window
with
the
software
versions appears, then the regulator switches
to the STOP operation mode.
8.4
Presetting boiler temperature
3
2
1
1
2
3
5
6
10
9
12
4
8
2
7
11
13
14
Summary of Contents for ecoMAX 80 R1
