20
FeederPro Model 1000/1010 Operator Manual
T10160
4.
The Menus
The Main Menu is shown when the power is switched on.
From here you can reach all available items by using the
”Up/Down” arrow buttons and pressing the ”OK” button.
NOTE:
“Programs” are not available in ”Feeder Mode”.
4.2
Programs
To access the different programming possibilities, select
“Programs” by using the “Up/Down” arrow buttons and
pressing the “OK” button. From the “Programs” menu, select
the program you want to use by using the “Up/Down” arrow
buttons and pressing the “OK” button. The different
programming possibilities will be explained in item 4.2.1 to
4.2.5.
NOTE1: “Programs” are not available in ”Feeder Mode”.
4.1
Collator Mode / Feeder Mode
To change mode between ”Collator” and ”Feeder”, select
”Mode” using the ”Up/Down” button and press the ”OK”
button from the Main Menu. If machine was in ”Feeder”
mode, ”Collator” is automatically suggested and vice versa.
Press the ”OK” button to confirm selection.
Summary of Contents for FeederPro 1000
