Section 6. Maintenance and Troubleshooting
PX-820 Installation and Users Manual
57
9.
With the two side bezel hooks released, tilt the top of the bezel
slightly forward to release the top catch, then slide the bezel forward
to remove it.
Figure 33: Pull forward gently to remove the front bezel
CAUTION
: Do not touch any of the internal components that are visible.
10.
Position the new bezel in front of the drive and slide it gently in
place. Ensure that the top clip and all bezel hooks lock into place.
Figure 34: Slide the new bezel into position and make sure all bezel
hooks snap into place
