Section 2. Installing the PX-820A Internal ATAPI Drive
10
PX-820 Installation and Users Manual
Rear Panel—PX-820A Internal Drive
Also familiarize yourself with the drive’s rear panel.
Figure 2: Rear panel of the PX-820A internal ATAPI drive
•
Mode jumper
: Use the mode jumper to select operation as an IDE
master or slave, or for cable select. In general, leave this jumper at
its factory setting, which is master; and ensure that any other device
on the bus is jumpered as slave.
•
IDE cable connector
: Connects to your computer’s IDE (ATAPI)
interface using 80-conductor Ultra cable.
NOTE
: Although the PX-820A will operate with a 40-wire IDE cable, it
may not be able to write at 20X unless an 80-conductor IDE/ATA
cable is used.
•
Power connector
: Connects to your computer’s power supply to
provide DC +5 volts and +12 volts to the PX-820A.
