Section 2. Installing the PX-820A Internal ATAPI Drive
PX-820 Installation and Users Manual
31
Figure 16: Cable connections for an internal IDE drive
10.
Mount the PX-820A drive in the computer using the four screws that
were supplied with your drive. Use only these screws.
CAUTION:
Do not mount your drive in your computer using screws other
than those supplied by Plextor. You may damage the drive if you insert
screws that are too long or the wrong thread type.
This completes the installation procedure. Go to “Section 4. Using Your
PX-820” on page 43 to see how to use your PX-820A drive.
