Section 4. PlexTools Professional Functions
58
PlexTools Professional Reference Guide
FE/TE Test Preferences
Figure 53: Q-Check FE/TE Test Preferences Window
Graph Options:
•
Scale Limit
: Specifies the limit of the measuring scale on the graph.
•
Time Length Indication
: Specifies the time length indication of the graph.
•
Start Position
: Specifies the start position in minutes, seconds, frames.
•
End Position
: Specifies the end position in minutes, seconds, frames.
Procedure for Measuring TE/FE
1. Place a blank CD-R or CD-RW disc in the PlexWriter.
NOTE
: The test requires a blank disc. If you use a CD-R disc, discard the disc after
the test.
2. In PlexTools Professional, select the Q-Check FE/TE Test. You see the Q-Check
FE/TE Test window with a graph for focus error and tracking error.
3. Click the Preferences button to view or change the preferences. You can change
the scale, the start position, and the end position.
4. Click OK to exit the Preferences window and return to the Q-Check FE/TE Test
window.
5. To begin measurement, in the FE/TE Test window, click the Start button. You
see the traces representing focus error (FE) and tracking error (TE).
