Section 4. PlexTools Professional Functions
44
PlexTools Professional Reference Guide
Figure 40: CD Copy Window
•
Source
: Specifies source drive to use for the copy.
•
Read speed
: Specifies the reading speed. For good results, the reading speed
must be higher than the recording speed.
•
Destination
: Specifies the destination for the copy. This can be a drive or a file.
•
Simulate
: Simulates the burning process. Nothing will actually be written on the
CD-R or CD-RW disc.
•
Simulate and Write
: Simulates the burning process. If the simulation is
successful, the actual writing proceeds on the CD-R or CD-RW disc.
•
On the fly
: Copies a disc directly from CD to CD. This type of copying requires
sufficient system resources and performance. If on-the-fly copying results in
errors, it may be safer to disable this type of copying.
When on-the-fly copying is disabled, the source disc will be read into a
temporary file on the hard disk. This file will be used as the source for recording
the final disc. The temporary file is erased after the copying process has
completed.
•
Audio error detection
: Allows detection of errors during the reading of audio
tracks. This powerful PlexTools Professional feature is not provided with
standard audio extraction software.
•
Buffer under run proof
: Enables Buffer Under Run Error Proof technology,
which eliminates buffer under run errors, so you can safely use your computer for
other tasks while you’re writing to a CD-R or CD-RW disc.
•
Copies
: Allows burning of multiple copies of the disc.
•
CD Text
: Displays the CD TEXT window for adding CD text to the recorded
CD.
